Design of Neuromorphic Mixed-Signal Integrated Circuits for Multi-Analyte Implantable Biosensor Arrays
imec
Implantable biosensors offer a transformative approach to health monitoring by providing continuous, real-time insights into physiological states. However, the success of these systems depends critically on highly integrated, ultra-low-power designs capable of processing complex biological signals directly at the sensor node. Furthermore, next-generation multi-panel sensing arrays, which simultaneously detect diverse biochemical markers, require efficient processing of multiple data streams while maintaining the stringent power constraints of implantable devices.
At the Centre for Microsystems Technology (CMST), an imec-associated research laboratory at Ghent University, and through the ERC Starting Grant NEFELI, we are developing neuromorphic biosensors based on memristive devices. These sensors leverage brain-inspired architectures to enable energy-efficient, real-time sensing and processing of biochemical and physiological signals directly at the sensor level, thereby reducing reliance on power-hungry conventional computation.
The performance, reliability, and integration of such implantable systems can be significantly enhanced through the development of an Application-Specific Integrated Circuit (ASIC). ASIC technology enables hardware implementation of event-driven processing architectures that support in-memory computing, local learning mechanisms, and analogue signal conditioning, all of which are essential for real-time responsiveness, low latency, and ultra-low-power operation.
This PhD project aims to pioneer the development of an integrated ASIC platform tailored for multi-panel implantable biosensors with embedded neuromorphic processing capabilities. By drastically reducing power consumption while improving signal interpretation and classification, this research will pave the way for next-generation intelligent medical devices with broad applications in continuous health monitoring and disease management.
This research will involve:
Development of a multi-channel biosensor ASIC front-end for simultaneous acquisition from electrochemical sensor arrays, integrating analogue readout, data conversion, power management, and wireless communication.
Implementation of neuromorphic on-chip processing for real-time biosignal classification using event-driven and low-power hardware architectures.
Design, verification, and tape out of the ASIC , optimised for low noise, ultra-low power consumption, and high integration density.
Validation of the fabricated chip through electrical characterisation and integration with neuromorphic biosensor arrays in physiological monitoring environments.
Development of a miniaturised system-on-chip (SoC) and evaluate its sensing performance, energy efficiency, and wireless communication capabilities.
Demonstration of an implantable prototype , integrating the SoC with neuromorphic biosensors for intelligent health-monitoring applications.
The PhD researcher will be responsible for leading the ASIC development activities across both CMST (Ghent University) and imec Leuven. The candidate is expected to develop a deep understanding of the complete signal acquisition and processing chain, from sensor interface to on-chip intelligence, and to drive the development of the first fully functional prototype. Close collaboration with the multidisciplinary NEFELI team will be essential for sensor integration, data analysis, and system validation.
Required Skills and Background:
Master's degree (or equivalent) in Electrical Engineering, Microelectronics, Electronics Engineering, or a related field.
A strong foundation in analog and mixed-signal integrated circuit design, complemented by knowledge of signal processing theory and hardware-oriented algorithm implementation.
Experience with IC design and simulation tools such as Cadence Virtuoso, Spectre, or equivalent environments.
Knowledge of digital integrated circuit design is considered an asset.
Experience with laboratory characterisation, PCB design, and measurement equipment.
Familiarity with FPGA development and embedded firmware design is advantageous.
Required background : Engineering Science, Electrical Engineering, Microelectronics
Type of work : 10% literature, 20% algorithms, 50% IC design, 20% experimental testing
Supervisor : Ioulia Tzouvadaki (UGent)
Co-supervisor : Carolina Mora Lopez
Daily advisor : Carolina Mora Lopez The reference code for this position is 2027-013 . Mention this reference code in your application
- ...aligned to their designated wavelengths,... ...networks for programmable... ...phased arrays necessitate... ...errors, or signal degradation.... ...can be integrated into programmable... ...photonic circuits. These loops... ...explore and design analog... ...CMOS-photonics integration platform....SuggéréStage
- ...innovation, analog and mixed-signal integrated circuits, MEMS, and heterogeneous system integration. By bringing... ...platforms for applications in... ...large transducer arrays with advanced CMOS... ...will focus on the design of scalable... ...required. Strong analytical skills and enthusiasm...Suggéré
- ...CMOS biosensors integrated with visible... ...platforms for the detection... ...optical signals through... ...circuits (ICs) constitute... ...processing, mixed-signal... ...and dense multi-channel integration within compact... ...co-design approach... ...photonic biosensor systems .... ...Strong analytical skills and...Suggéré
- ...spectral information for applications such... ...readout and signal processing circuits. Designing compact imaging... ...efficient readout integrated circuits (ROICs)... ...focusing on the integration of photodetector... ..., and mixed-signal circuit design. System-level modeling...SuggéréStage
- ...Photonic integrated circuits are a key technology for quantum computing, optical sensing, LiDAR, communications,... ...photonic components, creating the design, fabrication, characterization, and... ...Participate in microfabrication and process integration Perform optical, electrical, and...Suggéré
- ...join imec’s memory design and pathfinding... ...advanced DRAM periphery circuits. You will work on... ...with the memory array, the array... ...technology assumptions, for emerging technologies... ...rapidly growing, multi-disciplinary team... ...devices, process integration, and system-facing...Temps complet
- ...you will do As analog design engineer researcher,... ...concepts and architectures for next generation ICs... ...to validate top-level integration. Guide and follow-up... ...environment. Work with multi-functional teams across... ...PhD on analog and mixed-signal circuit design with silicon-proven...
- ...spike and then reset for the next signal. This combination of... .... The resulting design principles could support... ...electronics and neuromorphic systems. What you... ...microcavities with integrated electrodes and microfluidics... ...with strong analytical skills and an enthusiasm...
- ...Circuits for quasi-adiabatic compute have already been proposed and demonstrated more than 30 years ago [e.g. M. Frank, PhD thesis MIT,... ...1999]. Researchers at that time demonstrated that those circuit designs enabled more energy efficient compute, but the area overhead and...
- ...providing the building blocks for a better life in a... ...-wave (mm-wave) RF Designs. In these fields our... ...sampling rate ADCs and integrated RF/mm-wave front-ends... ...research in the fields of circuit design for advanced (... ...-power RF and analog/mixed-signal integrated circuits in...Temps complet
- ...DNA sequencers, advanced biosensors and other heterogeneously integrated systems. We are looking for a Lead Process Integration Engineer to own the end-... ...process baselines, design rules, and defect-reduction... ...product introduction (NPI). Analytical Skills: Expert-level...
- ...future semiconducting systems challenges design-technology co-optimization research to look... ...(PPA) trade-off. Pathfinding research for future semiconductor systems requires not... ...remaining compatible with future heterogeneous integration paradigms such as CMOS 2.0 and τ-scaling....Stage
- ...In this internship, you will contribute to the design of next-generation integrated UV photonic devices based on imec's low-loss Aluminium Oxide waveguide... ...spectrometers and frequency-selective filters for fluorescence detection systems operating in the UV and blue...Stage
- ...nanopore technology: the integration of the biopore with electronic devices. By designing new proteins that... ...assembly of a dense array of individually readable... ...point-of-care technologies for the real-time... ...computational protein design will be leveraged to develop...Stage
- ...we shape the roadmap for the semiconductor industry... ...of state-of-the-art integrated circuits is a key enabler. Do... ...Analog IC Designer and chip lead. By joining... ...digital converters, multi-Gbps serializers and... ...with the other analog, mixed-signal and RF design teams....Stage
- ...electronic devices based on emerging 2D semiconductor materials such as MoS₂, WSe₂, and WS₂. These technologies are being explored for future low-power and high-performance electronics using device structures ranging from MOS capacitors and transistors to Hall-bar...Stage
- ...interface between integrated circuits and the outside... ...can be optimized for operation beyond... ...heterogeneous RF integration at sub-THz frequencies... ...electromagnetic design principles and... ...efficiency, polarization, array scalability,... ...–package–antenna signal path. A key...
- ...processing requests, specifications, and deliveries. Project lead for new Low Volume Production requests (NPI) from IMEC’s partners.... ...process data using statistical data analysis. Troubleshoot integration issues together with imec’s Process and Integration Experts....
- ...). These phenomena can gradually degrade circuit performance and eventually lead to timing... ...performance. The research will combine circuit design, reliability modeling, and electronic... ...: Pieter Weckx The reference code for this position is 2027-115 . Mention this...
- ...network (PDN) designed in a classical... ...processing the signal and power delivery... ...active device integration. It has entered... ...scaling roadmap for advanced... ...-DC conversion circuits enable efficient... ...circuits (DTCO). Design prototype circuits... ..., logic and mixed analog-digital...
- ...between them have costs of their own. Design flows still treat the technology as a single... ...partitioning and exploration framework for heterogeneous systems: cost models that... ...designs that separates what the technology mix contributes from what the tools contribute...Stage
- ...standard free-space optical components by integrating specially designed structured optical illumination,... ..., and highly parallelized optical biosensors. For more background information have a... ..., and new devices per your design. Depending on the candidate, this...
- ...performance of the image sensors. We will develop procedures for image lag, blooming and MTF. Other metrics could be included... ...more custom methods. Implement measurement procedures, integrating the code into our existing measurement software written in Python...Stage
- ...world leader in the design and development of... ...capabilities for electrical recording... ...complexity requires a multi-modal approach, i.... ...by electrical signals but also by intricate... .... Such an integrated platform would provide... ...microfabrication, wet-lab and analytical sciences. Type...
- ...practices. Lead the integration of advanced wafer-level... ...approaches for MEMS and implantable medical devices. Define... ...integration engineers, design teams, and project managers... ..., ANSYS, or similar multi-physics simulation... ...packaging. Strong analytical and problem-solving...
- ...excellence at imec for hardware-software-technology co-design for future... ...applications, technology, circuits and design to... ...Develop, customize, integrate multi-fidelity... ...technologies, design, integration paradigms. Contribute... ...possess strong analytical and quantitative...Temps complet
- ...dimensional fluidics platform for understanding, controlling,... ...improving robustness and CMOS integration. Fundamental studies will examine... ...will be translated into design rules and wafer-scale integration... ...of 2D-fluidics with existing biosensor platforms (e.g., nanopores,...
- ...consumption and high integration density. Co-packaged... ...develop a holistic co-design methodology for next-generation co-packaged... ...to minimize signal degradation and power... ...architecture , where active circuits remain on-chip while... ...(EM) and multi-physics simulation....
- ...the platform of choice for high-bandwidth optical... ...performance and reliability of integrated photonic devices have... ..., converting optical signals into electrical... ...rely on doping/material/design optimization and higher... ...Instability for Devices and Circuits,” Springer 2013 ,...
- ...driven by heterogeneous integration, where diverse... ..., and die-on-die—allow for more functionality per... ...defects, especially within multi-tier and patterned structures... ...also drops, reducing signal-to-noise ratio and making... ...candidate will design, fabricate and characterize...
Voulez-vous recevoir plus d'offres d'emploi ?
S'abonner et recevoir des offres d'emploi similaires à Design of Neuromorphic Mixed-Signal Integrated Circuits for Multi-Analyte Implantable Biosensor Arrays. Soyez parmi les premiers à postuler !
