When Nano-Needles Break: Investigating Failure Mechanisms in Atom Probe Tomography
imec
At imec, we are in the unique position to develop materials
characterization solutions for the future generation semiconductor
technologies. Often overlooked, this is a crucial component in achieving the
ambitious goals depicted on our roadmap [1,2].
Atom Probe Tomography (APT) is an exciting 3-dimensional materials
characterization technique that has recently appeared on the semiconductor
landscape [3]. This state-of-the-art method is very valuable to reveal for example
dopant distributions in a gate-all-around nanosheet transistor, local
composition fluctuations in a SiGe spin qubit, interface diffusion in a
magnetic random access memory device, etc. However, when being applied to
semiconductor devices, APT is still a very novel characterization method, with
many opportunities for impactful research and development aspects around the
underlying physical mechanisms, automation approaches, 3D data reconstruction protocols,
statistical data analysis schemes and many more.
In this project, you will tackle the challenge of mechanical failure of specimen
during Atom Probe analysis. For APT, specimen are prepared into a micrometer
long needle with an endpoint radius of less than 50 nm. During APT data
acquisition, this needle is being held at cryogenic temperatures while being
exposed to a standing voltage of ~10 kV coupled with ultra-short (ps) laser
pulses at ~200 kHz frequency. These conditions induce cyclic mechanical and
thermal stresses, which in some material systems lead to premature fracture of
the needle before any data can be recorded. You shall identify the root-causes
for these failures and propose innovative solutions to mitigate them for a
well-defined set of material systems. This work will benefit from a strong
multidisciplinary and out-of-the-box mindset, as it touches on aspects of
high-field physics, material science, mechanical properties of materials,
interface physics, etc.
This internship is embedded in the Atom Probe Tomography (APT) research
group at imec. Depending on the state of the ongoing research and the
background and interests of the candidate, the project may focus on APT
experimental work, correlative studies combining APT with advanced complementary
characterization such as transmission electron microscopy or micromechanical
testing, or data-mining approaches aimed at uncovering previously hidden
correlations governing APT specimen yield. The access to state-of-the-art
equipment and material systems of varying complexity will enable you to study the
relationship between material properties (microstructure, defectivity,
interface properties), specimen preparation strategies, experimental
conditions, and failure mechanisms.
Ultimately, the aim is to broaden the application range of APT, allowing
us to better leverage the strength of this 3D characterization method. Speeding
up our learning cycles will be beneficial for the development of the next
generation devices and the achievement of the ambitious goals of the
semiconductor industry.
[1]
[2] Mary
A. Breton, et al., J. Micro/Nanopattern.
Mats. Metro. 21(2) 021206 (2022)
[3] B. Gault,
Nature Reviews Methods Primers volume 1, 51 (2021)
Required background
: Materials science and engineering, Physics
with a strong focus on solid state physics
Type of internship : Master internship, PhD internship
Duration : 12 months
Required educational background : Physics, Materials Engineering, Mechanical Engineering
University promotor : Claudia Fleischmann (KU Leuven)
Supervising scientist(s) : For further information or for application, please contact Jeroen Scheerder ( Voir email sur chipmakerjobs.com ) The reference code for this position is 2026-INT-335 . Mention this reference code in your application. Only for self-supporting students.
Applications should include the following information:
resume motivation current study
Incomplete applications will not be considered
- ...The data quality in scanning probe microscopy (SPM) is directly linked to the quality of the SPM tip being used. The use of blunt, irregularly shaped, or multiple-contact points tips introduces convolution artifacts that compromise the measurement accuracy, not only in...SuggéréStage
- ...increasingly limited in their ability to predict failure mechanisms across different dielectric systems. A... ...rupture and defect generation at the atomic scale is therefore essential for next-... ...techniques, the project will investigate the atomic mechanisms governing bond...SuggéréStage
- ...As we approach the limits of nano-electronic device scaling, novel transistor architectures... ...understanding of growth inhibition mechanisms on carbon surfaces 1,2,3 , quantify... ...student a combined experimental/theoretical investigation might be possible) Supervisor : Annelies...Suggéré
- ...critical thinking to help shape and drive imec’s research in fluidics across the micro- and nanoscale. Scientific depth in fluid mechanics, electrokinetic phenomena and nanoscale ion transport is the primary requirement, complemented by the ability to connect physical...Suggéré
- ...WSe 2 attract great interest for application in nano-electronic devices, in view of their monolayer structure, atomic thickness, large band gap values, low... ...knowledge gaps remain regarding the atomic-scale mechanisms governing oxidation of 2D heterostructures and...SuggéréStage
- What you will do The selected candidate will use their skills and experience to drive the ionics expertise domain within the Lab, Exploratory Device and new Materials (LEAN) expertise center in imec, Leuven. Together with the LEAN scientific leadership, you will define...Stage
- ...help them stick together and work as one. When making the chip, the small die is... ...scientific and engineering challenges. Mechanical stresses and bonding dynamics can result... ...electrical performance or cause device failures. As device features shrink and dies or wafers...
- ...in developing reliable and miniaturized PAG‑enabled DNA nano-synthesis platforms. Non‑conventional solvents provide... ...nano-synthesis using PAGs. In this thesis, you will investigate the mechanisms governing proton diffusion in non‑conventional liquid media...Stage
- ...Rydberg-atom sensors detect radio-frequency (RF) electric fields using laser-prepared atoms in a vapor cell, read out entirely optically. Because the signal is linked to fundamental atomic properties of a gas of atoms, these sensors are self-calibrated to atomic constants...Stage
- ...droplets, or diffusive chemical gradients such as pH. This PhD will investigate a fundamentally different approach: the creation of... ...background : Chemistry Biochemistry Bioengineering Nanotechnology / Nano-engineering Type of work : 60% experimental, 25% modelling 15...
- ...characterization methods, with a particular focus on Atomic Force Microscopy (AFM), to address the... ...a result, artefacts have been observed when measuring inhomogeneous structures (e.g.... ...dielectrics) and commercially available probes with different geometries will be also...
- ...patterning efficiency. High-speed optical nano-patterning offers a promising approach... ...patterns. This project aims to investigate and develop a high-speed optical nano... ...Chemical Engineering, Materials Engineering, Mechanical Engineering, Nanoscience &...Stage
- ...device transmits information by modifying the ultrasound signal reflected back to an external reader. In this internship, you will investigate the potential of ultrasonic backscatter communication using imec's MEMS transducer technology. MEMS-based ultrasound...Stage
- ...The PhD offers an exciting opportunity to investigate the fracture mechanics and mechanical stability of Back-End-Of-Line (BEOL) and 3D interconnect... ...packaging. Understanding the mechanical stability and failure behavior of these highly scaled structures is particularly...
- ...uncertainties is of utmost importance. The task gets more complex when solution is not unique and a number of model parameters are... ...apply advanced statistical methods like Markov Chain Monte-Carlo to probe and map multidimensional error-parameter spaces in order to...Stage
- ...-free approaches using stray fields or structural symmetry breaking have been explored, achieving reliable and robust field-free... ...concept. The internship project aims to systematically investigate the magnetic properties of the in-plane ferromagnet, like saturation...Stage
- ...This PhD project aims to advance 3D micro-electrical impedance tomography (3D- μ EIT) as a real-time, non-invasive, and label-free... ...newly developed 3D- μ EIT platform at imec, the project will investigate organoid development, maturation, and disease progression in...
- ...Freeform Nano-Optics for Extreme Ultraviolet (EUV) Inspection and Metrology Research... ...Objectives The PhD candidate will investigate the fundamental limits and technological... ...modeling and optical system design. Investigation of polarization, phase, and coherence engineering...
- ...scientific communities. This internship topic will focus on (a) investigation of the structural (by XRD or HRTEM) & magnetic properties (by... ...epitaxial heterostructures, knowledge on spintronics and nano-magnetism. Existing skills on SOT characterization and analysis...StageTravail postéRecrutement immédiat
- ...issues, ultimately resulting in a PIC failure. The degradation of device performance... ...are critical and thus require further investigation. In 2026, a new industrial qualification... ...behaviors and develop new failure-mechanism-oriented test sequences, where necessary...
- ...material development. The aim of this internship is to investigate the impact of material systems and device design... ...reduced device dimensions. By studying the underlying switching mechanisms through advanced electrical and physical characterization, this...Stage
- ...devices. We are currently developing new methodologies to probe and understand semiconductor/solution interfaces. One... ...procedure cannot be used. In this project, the student will investigate the band-edge positions of BaTiO 3 (and/or SrTiO 3 ) thin...Stage
- ...integrated with silicon in beyond CMOS devices. In a channel only three atoms thick, every processing step counts: wet-chemical etching and... ...composition and band alignment, and photoluminescence to probe doping and defect passivation. In-house ultra-trace-level ICP-MS...Stage
- ...devices, and integrity of bits in quantum technologies. P ulsed Atomic Layer Etching (PALE) offers a promising pathway to achieve... ...and self-limited surface reactions. This project aims to investigate and optimize P ALE processes for patterning SOT MRAM device...Stage
- ...Aligned carbon nanotube (ACNT) field‑effect transistors (FETs) are investigated at imec as a potential single-molecule sensing platform due to their exceptional electrical properties, pristine surface, and back end of line processing compatibility. To fully exploit their...Stage
- ...Photonics plays a central role in neutral atom quantum computing, because all operations on the qubits are mediated by light. Laser beams are required to trap atoms, cool them to ultra-cold temperatures, manipulate their internal states, and perform measurements. As systems...
- ...observed in active silicon photonic components under stress [5-7]. Failure mechanisms such as enhanced trap-assisted tunneling, surface/interface... ...Dark Current Degradation of Monolithic InGaAs/GaAs-On-Si Nano-Ridge Photodetectors,” IRPS 2024, Required background :...
- ...implementation options? What are the limitations and challenges when deploying computational imaging pipelines on heterogeneous... ...Literature Review Review lens-free imaging concepts and applications. Investigate the Versal AI Core architecture and development tools. Phase 2:...Stage
- Defects play an important role in the reliability of electronic devices. While their stability can effectively be described using first-principles methods, like Density Functional Theory, it is currently difficult to 1) include the effect of the embedding dielectric environment...
- ...Scanning probe microscopy (SPM) is a powerful technique for characterizing materials and devices at the nanometre scale , but the measurement quality depends directly on the SPM tip . Blunt, irregular, or multi-contact tips produce convolution...Stage
Voulez-vous recevoir plus d'offres d'emploi ?
S'abonner et recevoir des offres d'emploi similaires à When Nano-Needles Break: Investigating Failure Mechanisms in Atom Probe Tomography. Soyez parmi les premiers à postuler !
