Inscrivez-vous pour accéder à toutes les fonctionnalités de notre service.
  • Recherche d'offres d'emploi
  • Favoris
  • Créer un CV
    Nouveau
  • Salaires
  • Souscriptions

Life cycle assessment of semiconductor cleanroom buildings and fab infrastructure

Stage

imec

Context

Environmental assessments of semiconductor

manufacturing often focus on the electricity, gases, chemicals, and water used

during production. The buildings and facility systems that support this

production receive much less attention and are often represented using generic

construction factors or excluded from the model altogether. A recent scope

revision of imec.netzero, imec’s life-cycle assessment platform for

semiconductor manufacturing, showed that these infrastructure elements can make

a meaningful contribution to the environmental footprint per wafer. It also

highlighted substantial uncertainty, as published studies use different system

boundaries and rarely report the detailed quantities needed to represent a

semiconductor fab accurately.

High-volume semiconductor fabs are also very

different from conventional buildings. They combine large concrete and steel

structures with specialised cleanroom elements such as partitions, ceilings,

and raised floors. They also contain extensive HVAC, electrical, gas, water,

and wastewater networks, together with central air-handling, cooling, power,

and process-utility equipment. Automated material-handling systems, support

buildings, and site infrastructure add further complexity.

This project will develop a modular and

traceable life-cycle model covering the physical infrastructure within the

boundary of a generic high-volume 300-mm fab. The model will make the

environmental impact of fab infrastructure an explicit and quantifiable part of

semiconductor life-cycle assessment, allowing infrastructure design choices to

be directly linked to their impact per processed wafer.

 

Objective

The

project will build and implement the fab infrastructure model in imec.netzero. .

It

will cover the main infrastructure elements at a consistent level, with more

detail where the environmental impact or uncertainty is highest.

The work will include:

Setting up a

clear structure for the different parts of the fab, including foundations, the

building structure, cleanroom fit-out, support buildings, mechanical and

electrical systems, water and wastewater systems, central facility equipment,

and automated material handling.

Building the

inventory using available data such as floor areas, quantity take-offs, bills

of materials, environmental product declarations, supplier information,

construction case studies, and internal data.

Including the

main life-cycle stages, from production and construction to replacement,

refurbishment, and end-of-life treatment.

Using parameters such

as cleanroom area, total floor area, wafer-start capacity, utility capacity,

equipment lifetime, and replacement rate to represent different fab designs.

Calculating

the environmental impact at different levels, including per facility, per

square metre, per year, and per processed wafer.

 

Responsibilities

You will

work with the sustainability team and, where possible, cleanroom and facility

experts to collect the required data and carry out the LCA.

Your work

will include:

Reviewing

relevant studies, technical data, and available internal information.

Preparing and

checking the data used in the LCA.

Building and

running the LCA calculations.

Analysing the

results and identifying the main environmental contributors.

Supporting the

implementation and testing of the model in imec.netzero

 

Skills and Learning Objectives

Experience with life-cycle assessment is

required. Familiarity with construction materials, building services, BIM,

quantity take-offs, or environmental product declarations is an advantage.

During the project, you will gain experience in:

Applying LCA to complex industrial buildings and facilities

Working with construction and facility data from different sources

and levels of detail

Making and documenting modelling choices when data are incomplete

Assessing data quality and uncertainty in practical LCA work

Type of internship : Master internship, PhD internship

Duration : 6 month to 1 year

Required educational background : Other, Materials Engineering, Mechanical Engineering, Computer Science, Energy, Finance

Supervising scientist(s) : For further information or for application, please contact Hanie Zarafshani ( Voir email sur chipmakerjobs.com ) and Job Soethoudt ( Voir email sur chipmakerjobs.com ) The reference code for this position is 2026-INT-258 . Mention this reference code in your application. Imec allowance will be provided.

Applications should include the following information:

resume motivation current study

Incomplete applications will not be considered

L'offre d'emploi a été publiée il y a 2 jours
Des emplois similaires qui pourraient vous intéresserBasé sur l'offre Life cycle assessment of semiconductor cleanroom buildings and fab infrastructure à Louvain
  •  ...Context Semiconductor manufacturing relies on highly specialised...  ...processing, cleaning, metrology, and inspection. These tools...  ...often excluded from life-cycle assessments or estimated using generic...  ...the data used in the LCA. Building and running the equipment and... 
    Suggéré
    Stage

    imec

    Louvain
    il y a 2 jours
  •  ...Context The semiconductor industry is...  ...connected, and electrified....  ...value chain to assess and improve...  ..., a virtual fab model...  ...contribute to the Life-Cycle Assessment...  ...Equipment and fab infrastructure...  ...materials Modelling cleanroom purity requirements...  ...LCA models, building on this... 
    Salle blanche
    Stage

    imec

    Louvain
    il y a 2 jours
  •  ...process-flow variants in the imec.netzero modelling environment and run environmental impact calculations. Compare different...  ...mode l ling framework that can be extended to additional power semiconductor generations and technologies, enabling systematic comparison of... 
    Suggéré
    Stage

    imec

    Louvain
    il y a 7 jours
  •  ...What will you do? As semiconductor devices continue to scale with the adoption...  ..., defect inspection and metrology face unprecedented challenges...  ...reduced computational and cycle-time costs. By tackling these...  ...Machine Learning Modelling – build from scratch or improving an existing... 
    Suggéré
    Stage
    Recrutement immédiat

    imec

    Louvain
    il y a 2 jours
  •  ...uren theorie, maar meteen meedraaien in een hightech omgeving, mét begeleiding van ervaren technici, tool owners en engineers. De cleanroom is het kloppend hart van imec. Hier worden innovaties gebouwd voor IT, gezondheidszorg en energie — en jij houdt de tools... 
    Salle blanche
    Temps complet
    Travail posté
    Travail le weekend

    imec

    Louvain
    1 Il y a un mois
  •  ...program in our 300 mm semiconductor pilot line, imec...  ...our Deposition and Diffusion Development...  ...within the cleanroom; Stabilizing and...  ...manufacturability and cycle time; Evaluating...  ...the continuous FAB production. In...  ...of expertise and build a large internal and... 
    Salle blanche
    Travail posté
    Travail le weekend

    Imec

    Louvain
    il y a 22 jours
  •  ..., lower-contrast SEM images, and stochastic failures (missing...  ...recalibration. None of them builds a shared, transferable understanding...  ...retraining from scratch. Semiconductor manufacturing is a demanding...  ...simulation, 2) reducing tool cycle time and metrology sampling,... 
    Stage
    Recrutement immédiat

    imec

    Louvain
    il y a 2 jours
  •  ...microscopy (SAM). The transmitted waves are identified by the letter T, and the reflected waves by the letter R. The initial transducer...  ...time-domain (FDTD) simulation is an asset. Interest in hands-on cleanroom/lab metrology (SAM, surface profilometry). Contact: Jeffrey.... 
    Salle blanche
    Stage

    imec

    Louvain
    il y a 7 jours
  •  ...architecture with an optimal power, performance, and area (PPA) trade-off. Pathfinding research for future semiconductor systems requires not only meticulously...  ...for multifarious design points. Based on your assessments, you will optimize a set of devices and technologies... 
    Stage

    imec

    Louvain
    il y a 2 jours
  •  ...Over the past decades, the semiconductor industry managed to continuously increase performance...  ...the integrated devices (e.g. transistors and memory arrays) to dimensions of just a...  ...similar structures will be one of the crucial building blocks for making ever higher performing... 
    Stage

    imec

    Louvain
    il y a 2 jours
  •  ...research process module or flow and drive improvements in consistency...  ...process flow, and take care of the cycle time during processing in imec’s advanced 300mm cleanroom. Leverage industry experience to...  ...well as with other departments and Fab Operations. You like taking... 
    Salle blanche

    imec

    Louvain
    il y a 7 jours
  •  ..., firmware, software, and embedded product platforms...  ...configurations, assess exploitability, and develop...  ..., Embedded Security, Semiconductor Security,...  ...connectivity, or communication-infrastructure products is advantageous...  ...Response. Reduce Risk. Build Trust. Drive Security... 
    Temps complet
    Travail à domicile

    NXP Semiconductors

    Louvain
    il y a 7 jours
  •  ...infrastructuur. Als Gas & Gas Detection Infrastructure Engineer ben je mee...  ...gasdetectiesystemen in onze cleanrooms en onderzoeksfaciliteiten. Met...  ...bij gaslekken, evacuaties en andere noodsituaties; Je neemt deel...  ...toekomstbestendige omgeving. IMEC and its affiliates will not... 
    Salle blanche

    imec

    Louvain
    il y a 7 jours
  •  ...Do you have a passion for technology and handson work? Through our Graduate Program, you...  ...opportunity to start your career in a hightech cleanroom environment, where learning, coaching, and...  ..., safe, and ready for innovation. The FAB cleanroom is the beating heart of our... 
    Salle blanche
    Équipe de nuit
    Travail posté
    Travail le weekend

    imec

    Louvain
    il y a 7 jours
  •  ...the "Time to Market" in our semiconductor R&D by revolutionizing how...  ...parametric extraction and electrical curves. Inspired...  ...Data Analytics , we want to build a system that combines a...  ...: Utilizing local GPU infrastructure for secure, private model inference... 
    Stage
    Recrutement immédiat

    imec

    Louvain
    il y a 2 jours
  •  ...develop advanced electronic devices based on emerging 2D semiconductor materials such as MoS₂, WSe₂, and WS₂. These technologies are being explored for...  ...compatibility across different measurement tools, and help build a scalable software framework that researchers can... 
    Stage

    imec

    Louvain
    il y a 2 jours
  •  ...-agent FOUP transport and handling, augmented by...  ...decomposition respecting cleanroom constraints (e.g.,...  ...autonomously and sensitive infrastructure that must not be...  ...stations in specialized semiconductor cleanrooms currently depends...  ...and C++ A hands-on, build-and-measure attitude... 
    Salle blanche

    imec

    Louvain
    il y a 2 jours
  •  ...Continued technology scaling and the integration of...  ...imec’s emerging semiconductor technologies into their...  ...performance, and how to build the modelling and simulation infrastructure needed to analyse these...  ...publications, technology assessments, and strategic research... 

    imec

    Louvain
    il y a 7 jours
  •  ...materials such as quantum dots and metal-halide perovskites are...  ...sources. ] The project builds on complementary expertise developed...  ...and characterization infrastructure. The candidate will gain...  ...the interface of photonics, semiconductor physics, and materials science... 

    imec

    Louvain
    il y a 2 jours
  •  ...Context The semiconductor industry is growing rapidly, as society becomes...  ...digitalized, connected, and electrified. At the same time,...  ...across the value chain to assess and improve the sustainability...  ...volume manufacturing semiconductor fabs and assembly lines,... 
    Stage

    imec

    Louvain
    il y a 2 jours
  •  ...Principal Investigator with deep scientific and hands-on expertise in ionics and solid-...  ...device technologies within a semiconductor-relevant environment. The ideal candidate...  ...reference point for the Ionics domain, building bridges across groups and departments and... 
    Stage

    Imec

    Louvain
    il y a 7 jours
  •  ...The continued scaling of semiconductor devices requires advanced characterization techniques capable...  ...resolution. Conventional electrical and optical characterization methods often provide...  ...materials and devices, especially for FAB integration. A particular focus will be... 
    Stage

    imec

    Louvain
    il y a 2 jours
  •  ...working closely with integration, metrology, and device teams to support the device...  ...lab and world-class characterization infrastructure. You will play a key role in advancing...  ...Experience in plasma processing, dry etch, or semiconductor manufacturing is highly valued.... 

    Imec

    Louvain
    il y a 5 jours
  •  ...integration R&D program and bilateral...  ...in imec’s 300mm FAB. You will support cleanroom operations...  ...progress, holds and cycle time. You will define...  ...data to assess process performance...  ...listen actively; you build bridges where...  ...common goals. Semiconductor development or lot... 
    Salle blanche
    Temps complet

    imec

    Louvain
    il y a 3 jours
  •  ...Operational Leadership Define and execute the low-volume wafer processing...  ...across yield, quality, cycle time, cost, and delivery....  ...and develop engineering talent. Build a high-performance culture focused...  ...in Electrical Engineering, Semiconductor Engineering, Materials Science... 

    imec

    Louvain
    il y a 7 jours
  •  ...have emerged as a versatile semiconductor platform for applications...  ...emitting diodes, photodetectors, and electronic devices. Beyond...  ...-of-the-art research infrastructure, including microfabrication...  ...gain hands-on experience in cleanroom processing techniques such... 
    Salle blanche
    Stage

    imec

    Louvain
    il y a 2 jours
  •  ...show (1) increased sensitivity for subtle manufacturing defects and, as the complexity of the circuits we can design in these...  ...types and behaviors and their detection conditions for advanced semiconductor technologies. If their nature so demands, we should develop new... 

    imec

    Louvain
    il y a 2 jours
  •  ...transistors that perform memory and logic operations. In order...  ...devices, the global semiconductor industry is introducing complex...  ...by imec’s advanced LAB and FAB infrastructure, which is composed of advanced...  ...bottlenecks. This allows you to build a unique network within... 

    imec

    Louvain
    il y a 2 jours
  •  ...will drive the development of advanced 2.5D and 3D packaging technologies from early...  ...hold at least 15 years of experience in semiconductor R&D, with significant expertise in advanced...  ...and organizational skills, allowing you to build alignment across diverse groups and... 

    imec

    Louvain
    il y a 7 jours
  •  ...The continuous scaling of semiconductor technology is driving increasingly small feature dimensions and pitches, enabled by advanced patterning technologies such as high...  ...on film-thickness and substrate effects. Assess the main measurement artefacts associated with... 
    Stage

    imec

    Louvain
    il y a 2 jours

Voulez-vous recevoir plus d'offres d'emploi ?

S'abonner et recevoir des offres d'emploi similaires à Life cycle assessment of semiconductor cleanroom buildings and fab infrastructure. Soyez parmi les premiers à postuler !